Sony HDR-AS100VR - Manual (Page 38)

Ta
bl
e of
con
ten
ts
O
p
era
tio
n
Sea
rch
Set
tings
Se
ar
c
h
In
dex
38 GB
USB Power
Supply
When connecting the camera to a computer or USB device with the micro USB cable (supplied),
the camera can be set so the connected device supplies power to it.
To make the setting, select [SETUP]
t [CONFG] first.
1 Press the NEXT button to display [SETUP], then press the ENTER button.
2 Press the NEXT button to display [CONFG], then press the ENTER
button.
3 Press the NEXT button to display [USBPw] (USB Power), then press the
ENTER button.
4 Press the NEXT button to select the setting, then press the ENTER
button.
• If you change the setting of the USB power supply while the micro USB cable is connected, disconnect
the cable, then reconnect.
• Power may not be supplied properly from a USB device with a power supply capacity of less than 1.5 A.
• If you turn the power of the camera on while charging the battery pack, charging stops and power is
supplied to the camera from a device connected via USB.
Supplies power from a connected device, through the micro USB cable.
Does not supply power from a connected device, through the micro USB cable.
Returns to the [USBPw] menu.
Notes
t
t
Setting
display
z How to supply power from a wall outlet (wall socket)
Use the USB charger AC-UD20 (sold separately). To connect the camera to the charger, use
the micro USB cable (supplied).