Sony DSC-W560 - Manual (Page 106)

Ta
ble
of
co
nte
n
ts
Op
e
rat
io
n
S
ear
ch
MENU/Settin
g
s
Se
ar
ch
In
de
x
106 GB
You can view an image recorded on the camera by connecting the camera to an HD (High
Definition) TV with the HD Output Adaptor Cable (sold separately). Use a Type3a-compliant
HD Output Adaptor Cable (sold separately).
1 Turn off both the camera and the TV.
2 Attach a conversion adaptor to an HD Output Adaptor Cable (sold
separately) and connect the camera to an HD (High Definition) TV with
the appropriate cable.
*The conversion adaptor is supplied with a Type3a-compliant HD Output Adaptor Cable (sold separately).
3 Turn on the TV and set the input.
4 Press (Playback) button to turn on the camera.
Images shot with the camera appear on the TV. Select the desired image with the control
button.
• Set [COMPONENT] to [HD(1080i)] (page 88).
• Images shot in [VGA] image size cannot be played back in HD format.
• When shooting movies in the condition with the camera and a TV connected using an HD Output
Adaptor Cable (sold separately), the image being shot is not displayed in the TV side.
• When using the camera abroad, it may be necessary to switch the video signal output to match that of
your TV system (page 89).
• When output to TV, Easy Viewing mode is invalid.
Viewing an image by connecting the camera to an
HD TV
Notes
HD Output
Adaptor Cable
(sold separately)
2 To the multi
connector
AUDIO
(Playback) button
COMPONENT
VIDEO IN
White/
Red Green/Blue/Red
1 To audio/video
input jacks
Conversion adaptor*
Continued r