Sony KV-34HS420 - Manual (Page 12)

11
SETU
P
Set
up
S
E
TU
P
SETU
P
S
E
TU
P
SETU
P
Rear Panel
2
3
4 5
7
8
6
1
Jack Description
1 VHF/UHF RF input that connects to your VHF/UHF antenna or cable.
2 S VIDEO IN 1/3 Connects to the S VIDEO OUT jack of your VCR or other video equipment that has
S VIDEO. S VIDEO provides better picture quality than either VHF/UHF (
1 ) or
composite video ( 3 ) connections.
3 VIDEO IN 1/3/4
VIDEO/L(MONO)
-AUDIO-R Connect to the composite A/V output jacks on your VCR or other video
component. A fourth component A/V input jack (VIDEO 2) is located on the front
panel of the TV. This video connection provides better picture quality than the
VHF/UHF (
1 ) connection.
4 MONITOR OUT Lets you record the program you are watching to a VCR. When two VCRs are
connected, you can use the TV as a monitor for tape-to-tape editing (not available
with 480p, 720p, or 1080i when the input is set to VIDEO 5-7).
5 AUDIO OUT (VAR/FIX)
L (MONO)/R Connects to the left and right audio input jacks of your audio or video equipment.
You can use these outputs to listen to your TV’s audio through your stereo system.
6 CONTROL S
IN/OUT Allows the TV to receive (IN) and send (OUT) remote control signals to other Sony
infrared-controlled audio or video equipment that has the CONTROL S function.
7 HDMI
(VIDEO 7 IN) HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-
digital audio/video interface between this TV and any HDMI-equipped
audio/video component, such as a set-top box, DVD player, and A/V receiver.
HDMI supports enhanced, or high-definition video, plus two-channel digital audio.
8 HD/DVD IN 5/6
(1080i/720p/480p/480i) Connect to your DVD player’s or digital set-top box’s component video (Y, P B , P R )
and audio (L/R) jacks. Component video provides the best picture quality (better
than
1 , 2 , or 3 ).
HS420.book Page 11 Monday, April 12, 2004 7:13 PM