Satellite receiver and vcr – Sony KV-34HS420 User Manual
Page 23
22
SETU
P
SETU
P
S
E
TU
P
SETU
P
Set
up
SETU
P
Satellite Receiver
and VCR
To connect a satellite receiver and VCR
1
Connect the CATV cable to the single (input) jack of the splitter.
2
Use a coaxial cable to connect one of the splitter’s two output
jacks to the TV’s VHF/UHF jack.
3
Use a coaxial cable to connect the splitter’s other output jack to
the satellite receiver’s VHF/UHF input jack.
4
Connect the satellite antenna cable to the satellite receiver’s
satellite input jack.
5
Use a coaxial cable to connect the satellite receiver’s VHF/UHF
output jack to the VCR’s VHF/UHF input jack.
6
Use an A/V cable to connect the satellite receiver’s A/V output
jacks to the TV’s A/V input jacks.
7
Use an A/V cable to connect the VCR’s A/V output jacks to the
TV’s A/V input jacks.
8
Run the Auto Setup program, as described in “Setting Up the
Channel List” on page 32.
Notes on Using This Connection
Using
S VIDEO jacks?
See page 15.
To Do This ...
Do This ...
Watch the satellite receiver
Press
TV/VIDEO
repeatedly to select the satellite receiver input (VIDEO 3 in
the illustration).
Watch the VCR
Press
TV/VIDEO
repeatedly to select the VCR input (VIDEO 1 in the
illustration).
Set up the TV remote control
to operate the satellite
receiver or VCR
If you have a non-Sony VCR or satellite receiver, you must program the
remote control. See “Programming the Remote Control” on pages 37-38.
Activate the TV remote
control to operate the satellite
receiver or VCR
For the satellite receiver, press
SAT/CABLE FUNCTION.
For the VCR, press
VCR/DVD FUNCTION
.
Control satellite receiver and
VCR functions with the TV
remote control
See “Operating a Satellite Receiver” on page 43 and “Operating a VCR” on
page 43.
Label video inputs to easily
identify equipment connected
to the TV
See the instructions for setting up Video Labels on pages 58-59.
HS420.book Page 22 Monday, April 12, 2004 7:13 PM