Usb) jack (52) – Sony DCR-SX60 User Manual

Page 52

Advertising
background image



Table of C

on

ten

ts

U

seful R

ec

or

ding

Techniques

Inde
x

Do not do any of the following when creating

a disc.

Turn off the camcorder

Disconnect the USB cable or the AC adaptor

Subject the camcorder to mechanical shock

or vibration

Eject the “Memory Stick PRO Duo” media

from the camcorder

You cannot add movies to a created disc.

Play the created disc to make sure dubbing was

performed correctly before deleting the movies

on your camcorder.

If [Failed.] or [DISC BURN failed.] appears on

the screen, insert another disc into the DVD

writer and touch

(DISC BURN) again.

Tips

If the total memory size of movies to be burnt

by the DISC BURN operation exceeds that of

the disc, disc creation stops when the limit is

reached. The last movie on the disc may be

cut off.

Disc creation time to dub movies to the limit of

the disc is about 20 to 60 minutes. It may take

more time depending on the recording mode or

the number of scenes.

You can play back created discs on a general

DVD player. If playback is not possible for any

reason, connect the camcorder to the DVD

writer, and then play back.

The disc mark appears on the camcorder

screen.

Creating a disc with a DVD writer,
etc., other than DVDirect Express

You can save movies on a disc by

connecting your camcorder to disc creation

devices, such as a Sony DVD writer other

than DVDirect Express, with the USB

cable. Refer also to the instruction manuals

supplied with the devices to be connected.

The method used to create a disc by

connecting your camcorder to a Sony DVD

writer with the USB cable is described here.

Connect your camcorder to the wall outlet (wall

socket) using the supplied AC Adaptor for this

operation (p. 16).

Sony DVD writer may not be available in some

countries/regions.




Turn on your camcorder, and
connect a DVD writer, etc., to the

 (USB) jack of your camcorder
with the USB cable (supplied).

The [USB SELECT] screen appears on

the camcorder screen.

If the [USB SELECT] screen does

not appear, touch (HOME) 

(OTHERS)  [USB CONNECT].

Touch [ USB CONNECT] when
movies are recorded on the
internal memory, or [

USB

CONNECT] when movies are
recorded on “Memory Stick PRO
Duo” media on the camcorder
screen.

Record movies on the connected
device.

For details, refer to the instruction

manuals supplied with the device to be

connected.

After the operation is completed,
touch [END]  [YES] on the
camcorder screen.

Disconnect the USB cable.

Advertising
This manual is related to the following products: