Connecting your monitor, Turning on the monitor and computer – Sony SDM-S94 User Manual

Page 3

Advertising
background image

3

(US)

US

G:\JOB\01 JAN\0116-SDM\825892S SDM-S74-S94 QSG_UC\4103139011 SDM-S74-S94
QSG_UC\02US02BAS-UC.fm

masterpage:Right

SDM-S74 or SDM-S94

4-103-139-01(1)

Connecting your monitor

Connect your monitor to a computer or other equipment.

1

Slide up the back cover.

2

Tilt the display forward.

3

Connect your monitor to a computer.

Connecting a Macintosh computer

Connect the supplied video signal cable to a video output connector
on the computer. If necessary, use an adapter (not supplied). Connect
the adapter to the computer before connecting the video signal cable.

4

Connect the supplied power cord securely to the
monitor’s AC IN connector.

5

Connect the other end securely to a power outlet.

Note

For bundling the cords and cables, refer to the Operating Instructions on
the supplied CD-ROM.

Turning on the monitor and
computer

Turn on your monitor first, then a computer.

1

Press the MAIN POWER switch on the right side of
the monitor in the direction of the

[

, if it is not

already pressed. Make sure the

1

(power) indicator

is lit in red.

Note

The default setting of the MAIN POWER switch is in the direction of
the [.

2

Press the

1

(power) switch on the front right of the

monitor.

The 1 (power) indicator lights up in green.

3

Turn on the computer.

• Turn off the monitor, computer, and any other

equipment before connecting them.

• Do not touch the pins of the video signal cable plug.

backcover

1

2

to the DVI-D input
connector (digital RGB)

5

HD-15

DVI-D

INPUT 1

INPUT 2

Illustrations of monitor
rear are the SDM-S74.
SDM-S94 has the AC
IN connector on the left.

to the HD15 input
connector (analog RGB)

4

to AC IN

3

DVI-D video
signal cable
(digital RGB)
(supplied)

HD15-HD15
video signal
cable (analog
RGB)
(supplied)

to power outlet

power cord (supplied)

No need for specific drivers

The monitor complies with the “DDC” Plug & Play standard and
automatically detects all the monitor’s information. No specific driver
needs to be installed on the computer.

MAIN POWER

1

lights in red

2

lights in green

Advertising
This manual is related to the following products: