ATEN ALTUSCN KH1516I - Manual (Page 80)

KH1508i / KH1516i User Manual
68
Š The access rights choices are explained in he table, below:
Š The default setting is Full for all users on all ports.The access rights can be
changed in the following ways:
Š Click directly over an access right to cycle through the choices
Š Move the highlight bar to a port and press + to cycle forward through
the choices
Š Move the highlight bar to a port and press - to cycle backward through
the choices
Š [Shift] Click on any port to have all the ports on the Station cycle
through the choices in unison
Š Hold down [Shift] and tap + to have all the ports on the Station cycle
forward through the choices in unison
Š Hold down [Shift] and tap - to have all the ports on the Station cycle
backward through the choices in unison
Š When you have finished making your choices, click Save.
Š If you want to abandon your choices and exit without saving, click
Cancel.
Choice Description
Full The user can view the remote screen and can perform operations
on the remote system from his keyboard and monitor.
View Only The user can only view the remote screen; he cannot perform any
operations on it.
None No access rights - the Port will not show up on the User's list on the
Main Screen.