Sony NWZ-B103FBLK - Manual (Page 25)

NWZ-B103F / B105F. GB. 3-268-876-11(1)
 
NWZ-B103F / B105F. GB. 3-268-876-11(1)
Power
Symptom Cause/Remedy
The power does not turn on. • The HOLD switch is set to the direction of the arrow ().
 Rotate the HOLD switch to the opposite direction of the
arrow () ( page 9).
• If you press the  /  button immediately after turning off the
player, the player does not start due to the shut down processing.
Wait for a few seconds, then turn on the power.
• The remaining battery is insufficient.
 Charge the battery by connecting to the computer ( page 12).
 Even after charging the battery, nothing is changed, press the
RESET button to reset the player ( page 43).
• Delete unnecessary files.
 Delete unnecessary files until the combined total of files and
folders becomes 999 or less.
 At least 20 MB of some free space is necessary to function
normally.
You can check the free space by clicking [My Computer],
right-clicking [WALKMAN], and then opening the
[Properties] window by left-clicking.
Troubleshooting (continued)
Symptom Cause/Remedy
Battery life is short. • The operating temperature is below 5 °C (41 °F).
 Battery life becomes shorter due to the battery characteristics.
This is not malfunction.
• Battery charging time is not enough.
 Charge the battery until appears.
• By adjusting the settings or managing the power supply
properly, it is possible to save the battery power and use the
player for a longer time ( page 41).
• The battery is required to be replaced.
 Consult your nearest Sony dealer.
• Copyright-protected contents are being played.
 When copyright-protected contents are played, battery life
may be shorter.
The player cannot charge the
battery.
• The player is not connected to a USB port on your computer
properly.
 Disconnect the player, and then reconnect it.
• The battery is charged in an ambient temperature out of the
range of 5 °C (41 °F) to 35 °C (95 °F).
 Charge the battery in an ambient temperature of 5 °C (41 °F)
to 35 °C (95 °F).
• Your computer is not on.
 Turn on the computer.
• Your computer enters Sleep or hibernate status.
 Release the computer from Sleep or hibernate status.
Charging completes very quickly. • If the battery is already almost fully charged when charging
begins, little time is needed to reach full charge.
Continued 
Troublesho
oting