Arrow Fastener VD108-A 697.68618 - Manual (Page 17)

17
NOTE:
Door Track Splice (painted part)
Step 4
A17
● Parts Needed For ●
Door Track Assembly
● ● ● ● ● 6403 Door Track Splice (1)
● ● ● ● ● 9366 Door Track (2)
The door track assembly supports
the sliding doors and reinforces the
front wall. It is made up of three pieces.
1
Using the door track splice,
(painted), join the door track
(galvanized) pieces end-to-end as
shown.
2
Insert four screws from the under-
side only.
Hint: The holes in the top side of the
door track assembly are for fastening
the gable to the top of the front wall in
a later step.
3
Position door slides onto the legs,
from the end of door track
assembly, as shown in the end view.
NOTE: Flat side on top, pins and
holes
must be oriented as shown.
4
Set this piece aside for later use.
66242
STEP
3
118 1/8" 3m
STEP
4
END VIEW
STEP
1
9366
STEP
2
6403
9366
Long Leg
on Top
Short Leg
on Bottom
9366
9366
6403
66242
118 1/8" 3m
118 1/8" 3m