Sony PCG-FX240K - Manual (Page 31)

Connecting to a Local Area Network (LAN)
31
Connecting to a Local Area Network (LAN)
You can connect your notebook to 10Base-T and 100Base-TX-type networks.
For the detailed settings and devices needed to connect to the network, ask your
network administrator.
✍
Your notebook does not work with party lines, cannot be connected to a coin-operated
telephone, and may not work with multiple phone lines or a private branch exchange
(PBX). Some of these connections may result in excess electrical current and could
cause a malfunction in the internal modem.
If you connect a phone line coming through a splitter, the modem or connected device
may not work properly.
Connecting to LAN
Warning: Only connect 10Base-T and 100Base-TX cables to the Ethernet
port. Do not connect any other type of network cable or any telephone line.
Connecting cables other than those listed above may result in an electric
current overload and could cause a malfunction, excessive heat, or fire in the
port. To connect the unit to the network, contact your network administrator.
Note that if you enable Wake on LAN, the power saving mode will be switched
to Standby mode.
Ethernet
port