Warning messages – Sony NEX-3 User Manual

Page 143

Advertising
background image

143

GB

Ta
ble
of

co
nt

e

n

ts

Sa
mp
le

ph
oto

se
ar

c

h

M

e

n

u

s

ear

ch

In

dex

Warning messages

If the following messages appear, follow the instructions below.

Incompatible battery. Use correct model.

• An incompatible battery pack is being used.

Set Area/Date/Time.

• Set the date and time. If you have not used the camera for a long time, charge the internal

rechargeable battery.

Power insufficient

• You tried to clean the image sensor (Cleaning Mode) when the battery level is insufficient. Charge the

battery pack or use an AC Adaptor (sold separately).

Unable to use memory card. Format?

• The memory card was formatted on a computer and the file format was modified. Select [OK], then

format the memory card. You can use the memory card again, however, all previous data in the
memory card is erased. It may take some time to complete the format. If the message still appears,
change the memory card.

Memory Card Error

• An incompatible memory card is inserted or the format has failed.

Reinsert memory card.

• The inserted memory card cannot be used in your camera.
• The memory card is damaged.
• The terminal section of the memory card is dirty.

This memory card may not be capable of recording and playing normally.

• The inserted memory card cannot be used in the camera.

Processing...

• Long exposure noise reduction will be done for the same amount of time that the shutter was open.

You cannot do any further shooting during this reduction process. You can disable the long exposure
noise reduction function.

Unable to display.

• Images recorded with other cameras or images modified with a computer may not be able to be

displayed.

Cannot recognize lens. Attach it properly.

• The lens is not attached properly, or the lens is not attached. If the message appears when a lens is

attached, reattach the lens. If the message appears frequently, check whether the contacts of the lens
and camera are clean or not.

• When attaching the camera to an astronomical telescope or something similar, set [Release w/oLens]

to [Enable] (page 95).

Continued

r

Advertising
This manual is related to the following products: