P.11) – Sony DCR-SR80 User Manual

Page 11

Advertising
background image

11

Ge
tt

in

g

S

ta

rte

d

To charge the battery pack using only
the AC Adaptor

Slide the POWER switch up to OFF (CHG),
then connect the AC Adaptor directly to the
DC IN jack on the camcorder.

Charging time:
Approximate time (min.) required when you
fully charge a completely exhausted battery
pack.
Recording/Playback time:
Approximate time (min.) available when you
use a fully charged battery pack.

(Unit:min.)

*

1

When [REC MODE] is set to [HQ].

*

2

When the LCD backlight turns on.

*

3

When the LCD backlight turns off.

*

4

Typical recording time shows the time when you
repeat recording start/stop, turning the power on/
off and zooming.

On the battery pack
• Before changing the battery pack, slide the

POWER switch to OFF (CHG).

• The power will not be supplied from the battery

as long as the AC Adaptor is connected to the DC
IN jack of your camcorder, even when the power
cord is removed from the wall outlet.

On the charging/recording/playback time
• Times measured with the camcorder at 25°C

(77°F). (10-30°C (50-86°F) is recommended.)

• Available recording and playback time will be

shorter when you use your camcorder in low
temperatures.

• The available recording and playback time will

be shorter depending on the conditions under
which you use your camcorder.

On the AC Adaptor
• Connect the AC Adaptor to an easily accessible

wall outlet close by. If any trouble occurs while
using the adaptor, immediately shut off the power
by removing the plug from the wall outlet.

• Do not use the AC Adaptor placed in a narrow

space, such as between a wall and furniture.

• Do not short-circuit the DC plug of the AC

Adaptor or battery terminal with any metallic
objects. This may cause a malfunction.

PRECAUTION
• Even if your camcorder is turned off, AC power

(house current) is still supplied to it while
connected to the wall outlet via the AC Adaptor.

Power supply
You can use your camcorder in any countries/
regions using the AC Adaptor supplied with your
camcorder within the AC 100 V to 240 V, 50/60 Hz
range.
Use a commercially available AC plug adaptor [a],
if necessary, depending on the design of the wall
outlet [b].

Available running time for the
supplied battery pack NP-FP50

DCR-SR40

DCR-SR60/
SR80

Charging time

125

125

Recording time

*

1

Continuous
recording time

125

100*

2

105*

3

Typical
recording time

*

4

65

55*

2

55*

3

Playback time

140

115*

2

Open the jack cover

POWER switch

DC plug

DC IN
jack

AC-L25A/
L25B

[b]

[a]

Advertising
This manual is related to the following products: