Sony WEGA KV-24FV12 - Manual (Page 33)

Using the Menus
21
Using the Channel Setup Menu
To access the Channel Setup menu, see “To access a menu” on page 17.
Favorite
Channel
Quick access
to favorite
channels
With the Favorite Channel menu open:
1 Press g or to select.
2 Use the F or buttons to select Auto or Manual
(selecting Auto will display in gray the last five
channels accessed by the
buttons).
3 When in Manual, press G then to select the position (1-5)
where you want to set a favorite channel. Then press g or .
4 Using the F or buttons, select the desired channel.
5 Press then , the TV will change to the channel entered.
Channel Fix 2-6: Select when you want to control all channel selection through a
cable box or VCR. Select the appropriate channel (usually 3 or 4) and
use the cable box’s or VCR’s remote control for channel selection.
Video : Select from available video inputs when you have
connected video equipment (e.g. satellite receiver) and you want
your TV fixed to it.
OFF: Channel Fix is not set.
Channel
Skip/Add Use this feature after you run Auto Program to skip unwanted
channels or add new ones.
1 Use the buttons or the [CH +/-] buttons to select the
channel, then press .
2 Press to Skip or Add (only one option will be available).
Channel
Label
Label up to 40
channels with their
call letters
With the Channel Label window open:
1 Press , then press F or until you reach the desired channel
number.
2 Press to activate the channel.
3 Press F or to display the first call letter or number of the
caption and press to select it. When finished, press g or
to activate.
Favorite Channel
Channel Fix: OFF
Channel Skip/Add
Channel Label
Channel Setup
Move Select End MENU
F
0 9
F
F
✍
To use Favorite Channel: Exit all menus and press . Press F or to
move the cursor to the desired channel number and press .
F
0 9
F
F
✍
Favorite Channel,Channel Skip/Add, and Channel Label cannot be used
when Channel Fix is set.