Troubleshooting – Sony WEGA KV-24FV12 User Manual

Page 46

Advertising
background image

34

Operating Instructions

Troubleshooting

If you are having a problem with your TV, try the suggestions below. If
the problem persists, contact your nearest Sony dealer.

No picture, no
sound

Make sure the power cord is plugged in.

If a red light is flashing on the front of your TV for
more than a few minutes, disconnect and reconnect
the power cord to restore the TV. If the problem
continues, call your local service center.

Check the TV/VIDEO settings: when watching TV, set
to TV; when watching video equipment, set to VIDEO
(page 11).

Make sure the batteries have been inserted correctly
into the remote control (page 2).

Try another channel, it could be station trouble.

Poor or no
picture, good
sound

Adjust Picture in the Video menu (page 18).

Adjust Brightness in the Video menu (page 18).

Check the antenna and/or cable connections (page 3).

Good picture,
no sound

Press

so that MUTING disappears from the

screen (page 11).

Check your Audio settings. Your TV may be set to
Auto-SAP (page 20).

No color

Adjust Color in the Video menu (page 18).

Only snow
appears on the
screen

Check the Cable setting in the Options menu under
Setup (page 30).

Check the antenna and/or cable connections (page 3).

Make sure the channel selected is currently
broadcasting.

Dotted lines or
stripes

Adjust the antenna.

Move the TV away from other electronic equipment.
Some electronic equipment can create electrical noise,
which can interfere with TV reception.

Double images
or ghosts

Check your outdoor antenna or call your cable service.

Advertising
This manual is related to the following products: