Sony ICD-BM1AVTP - Manual (Page 52)

52 GB
Using the ”Digital Voice Editor“
Software
By connecting the IC recorder to your computer with the supplied USB
cable, you can use the “Digital Voice Editor” software to do the following:
• Saving new IC recorder messages automatically on your computer‘s hard
disk (AutoSave function)
• Saving the selected IC recorder messages on your computer’s hard disk.
• Transferring the PC messages back to the IC recorder.
• Playing or editing the messages on your computer.
• Sending a voice e-mail message using MAPI e-mail software.
• Transcribing your IC recorder message using Dragon
NaturallySpeaking ® speech-recognition software (supplied with ICD-
BM1AVTP only).
For the details, see the supplied “Digital Voice Editor 2” software
operating instructions.
Connection
When you connect your IC recorder to the computer, “PC CONNECT” is
displayed on the display window. The IC recorder enters into PC
operation mode. Proceed with the operations with your computer.
To USB
connector of
your computer
To USB connector
of IC recorder
Connecting cable
(supplied)
Notes when you connect your IC recorder to the computer
• Do not connect the AC power adaptor (not supplied) to the unit.
• Do not connect the ear receiver or headphones to the unit.
• Make sure to keep the batteries installed in the unit.