Sony PCG-R505GL - Manual (Page 103)

Using PC Cards
103
4 Make sure the PC Card is selected, and click OK. A message appears stating
it is safe to remove the hardware device.
5 Push the Release button. The Release button pops out.
6 Push the Release button a second time. The PC Card pops out.
7 Gently pull the card out of the slot.
To remove a PC Card while the computer is off
1 Push the Release button once. The Release button pops out.
2 Push the Release button a second time. The PC Card pops out.
3 Gently pull the card out of the slot.
To remove slot protectors
1 Push the Release button once. The Release button pops out.
2 Push the Release button a second time. The slot protector pops out.
3 Pull the protector out of the slot. If you use a Type III PC Card, you need to
remove both the top and bottom PC Card slot protectors.
Frequently asked questions
Why doesn’t my PC Card work?
❑ Make sure the PC Card is inserted properly. See “Inserting PC Cards” for
more information.
❑ Make sure the PC Card is compatible with the Microsoft® Windows®
operating system installed on your computer.
❑ Use the Sony Notebook Setup utility to disable devices you are not currently
using. See “To open Sony Notebook Setup” for more information.
❑ Make sure any necessary driver software is installed.