Settings menu – Ask Proxima C180 UG User Manual

Page 34

Advertising
background image

33

Settings menu

Audio

: allows adjustments to the volume and balance, and turns the projec-

tor’s startup Chime on and off.

Sources

:

allows you to assign a particular input to a specific source key

when using the optional Integrator remote. Also allows selection of a
default Startup Source and enables or disables Autosource.

Sources>Startup Source:

this determines which source the projector

checks first for active video during power-up.

Sources>Autosource:

When Autosource is not checked, the projector

defaults to the source selected in Startup Source. If no source is found, a
blank screen displays. When Autosource is checked, Startup Source deter-
mines which source the projector defaults to at power-up. If no signal is
present, the projector checks the sources in order until a source is found or
until power down.

System>Rear:

reverses the image so you can project from behind a translu-

cent screen.

Ceiling

: turns the image upside down for ceiling-mounted projection.

Auto Ceiling

: automatically senses when the projector is inverted and turns

the image upside down. This is On by default.

Auto Power

: When Auto Power is checked, the projector automatically

goes into the startup state after the projector is powered on. This allows con-
trol of ceiling mounted projectors with a wall power switch.

Display Messages

: displays status messages (such as “Searching” or

“Mute”) in the lower-left corner of the screen.

Power Save

: automatically turns the lamp off after no signals are detected

for 5 minutes. After 3 additional minutes with no signal, the projector pow-
ers down. If an active signal is received before the projector powers down,
the image will be displayed.

Screen Save

: automatically blanks the screen with a black color after no sig-

nals are detected for a preset number of minutes. The image returns when
an active source is detected or a remote or keypad button is pressed. Screen
Save is disabled when Power Save is enabled.

Audio

Sources

Startup
Source

System menu

Screen Save

Advertising