Sony SDM-S94 - Manual (Page 16)

16
Locking the menus and
controls (MENU LOCK)
Lock the control of buttons to prevent accidental adjustments or
resetting.
1 Press the MENU button.
The main menu appears on the screen.
2 Press the m / M buttons to select (MENU LOCK)
and press the OK button.
The MENU LOCK menu appears on the screen.
3 Press the m / M buttons to select ON or OFF and
press the OK button.
• ON: Only the 1 (power) switch will operate. If you
attempt any other operation, the (MENU LOCK)
icon appears on the screen.
• OFF:Set (MENU LOCK) to off. If (MENU
LOCK) has been set to ON, when you press the
MENU button,
(MENU LOCK) is automatically
selected.
Technical Features
Power saving function
This monitor meets the power-saving guidelines set by VESA,
E NERGY S TAR, and NUTEK. If the monitor is connected to a
computer or video graphics board that is DPM (Display Power
Management) Standard compliant, the monitor will automatically
reduce power consumption as shown below.
SDM-S74
SDM-S94
* When your computer enters the “active off” mode, the input signal is
cut and NO INPUT SIGNAL appears on the screen. After 5 seconds,
the monitor enters the power saving mode.
“deep sleep” is the power saving mode defined by the Environmental
Protection Agency.
** The maximum power consumption is 1.0 W in 100-120 V AC areas.
Power mode Power consumption 1 (power)
indicator
normal
operation 45 W (max.) green
active off*
(deep sleep) 1.2 W (max.)** orange
power off 1 W (max.) red
main power off 0 W off
Power mode Power consumption 1 (power)
indicator
normal
operation 50 W (max.) green
active off*
(deep sleep) 1.2 W (max.)** orange
power off 1 W (max.) red
main power off 0 W off