Sony DVP-FX94 - Manual (Page 14)

master page=left
DVP-FX94
4-169-963-22(1)
C:\Documents and Settings\QA2\Desktop\4_Target_20091126\01US\01US05PLY1-
CEK.fm
14
To resume playback from the point
where you stopped the disc (Resume
Play)
When you press N again after you stop
playback, the player starts playback from
the point when you pressed x.
z
• To play from the beginning of the disc, press
x twice, and press N.
• When turning power on again after power off,
resume play starts automatically.
b
• Depending on the stop point, Resume play
may not start from exactly the same point.
• The resume point is cleared when:
– you open the disc lid.
– you press INPUT SELECT.
– you disconnect the adaptor or remove the
battery pack before turning off the player.
Notes on the screen saver
• A screen saver image appears when you
leave the player in pause or stop mode
without operation for more than 15
minutes. The image disappears when you
press N. For the setup of “Screen
Saver,” see page 20.
• The player goes to standby, 15 minutes
after starting the screen saver function.
Press N to come out of standby mode.
About various playback operations
* DVD VIDEO only
To Operation
Change the LCD
picture size Press OPTIONS to
select “LCD Mode”
(page 18).
Display the DVD
menu Press MENU (page 6)
or TOP MENU
(page 7).
Check the DVD
playback
information Press DISPLAY
(page 15).
Play DVDs*
repeatedly
(Repeat Play) Press DISPLAY to
select “Repeat”
(page 15).
Play DVDs in
fast reverse or
fast forward
(Scan Play) Press C/c repeatedly on
the player to select the
speed (page 6).
Switch between
original and
Playlist in DVD
(VR mode) Press TOP MENU
repeatedly (page 7).
Change the CD
playback
information Press DISPLAY
repeatedly (page 6).
Play CDs
repeatedly
(Repeat Play) Press MENU
repeatedly (page 6).
Play CDs
randomly
(Random Play) Press MENU
repeatedly (page 6).
Play CDs in fast
reverse or fast
forward
(Scan Play) Press C/c repeatedly on
the player to select the
speed (page 6).
01US01COV.book Page 14 Thursday, May 13, 2010 11:13 AM