Sony PCG-GRT100K - Manual (Page 43)

Cleaning Your Computer
43
company has the right to disconnect your service until you correct the
problem.
Cleaning Your Computer
❑ Clean the computer with a soft, dry cloth or a soft cloth lightly moistened
with a mild detergent solution. Do not use any type of abrasive pad, scouring
powder, or solvent such as alcohol or benzine, as these may damage the
finish of your computer. You can use canned compressed air specifically for
computers to remove dust.
❑ If a solid object falls onto the computer or a liquid leaks into the computer,
immediately turn off and unplug the computer. It is best to have the
computer checked by qualified personnel before you use it again.
❑ Avoid rubbing the LCD screen as this can damage the screen. Use a soft, dry
cloth to wipe the LCD screen or canned compressed air.
❑ Always disconnect the power cord before cleaning the computer.
Handling the LCD Screen
❑ Direct sunlight can damage the LCD. Be careful when using the computer
near a window.
❑ Do not scratch the LCD or exert pressure on it. This can cause a malfunction.
❑ Using the computer in low temperature conditions may produce a residual
image on the screen. This is not a malfunction. When the computer returns to
normal temperature, the screen returns to normal.
❑ The screen becomes warm during operation. This is normal and does not
indicate a malfunction.
❑ The LCD is manufactured using high-precision technology. You may,
however, see tiny black points and/or bright points (red, blue, or green) that
continuously appear on the LCD. This is a normal result of the
manufacturing process and does not indicate a malfunction.