Synchro-recording) – Sony MZ-N510CK User Manual

Page 23

Advertising
background image

23

To start/stop recording
in sync with the sound
source
(Synchro-recording)

During synchro-recording, the recorder
starts and stops recording in sync with the
sound source. When recording from
digital equipment (such as a CD player),
you can omit operating both the recorder
and the sound source, and easily make
digital recording. You can make synchro-
recording only when the optical cable is
connected.

1

Make connections.

Use the appropriate optical cable to
suit the source equipment. Connect
the cable firmly to the appropriate
jacks.

2

While the recorder is stopped, press
MENU.

3

Press . or > repeatedly until
“R-SET” appears in the display, and
then press ENTER.

4

Press . or > repeatedly until
“SYNC-R” appears in the display,
and then press ENTER.

5

Press . or > repeatedly until
“ON” appears in the display, and then
press ENTER.

6

Press

N

while pressing REC •

T MARK.

The recorder stands by for recording.

7

Play the source you want to record.

The recorder stars recording
automatically when it receives the
playing sound. “REC” light up in the
display.

To stop recording

Press x.

z

When there is no sound from the player for
about 3 seconds during synchro-recording, the
recorder goes into the standby mode
automatically. When the sound comes from the
player again, the recorder resumes synchro-
recording. If the recorder is kept in the standby
mode for 5 minutes or longer, the recorder stops
automatically.

Notes

•

The pause function cannot be turned on or off
manually during synchro-recording. Press

x

to stop recording.

•

Do not switch the “SYNC-R” setting while
recording. Recording may not be done
properly.

•

Even when there is no sound on the sound
source, there may be cases when recording
does not pause automatically during synchro-
recording due to the noise level emitted from
the sound source.

•

If a silent portion is encountered for
approximately 2 seconds during synchro-
recording from a sound source other than a
CD or an MD, a new track mark is
automatically added at the point where the
silent portion ends.

REC • T MARK

MENU

4-way control key
(ENTER •
N, ., >, x)

Advertising