Sony WEGA KV-27FS13 - Manual (Page 27)

Using the Remote Control and Basic Functions
15
Using the Remote Control
Button Description
1 MUTING Instantly turns off the sound. Press again or press
to restore sound.
2 SYSTEM OFF Powers off all Sony equipment at once, (may not
work with older equipment).
3 TV/VCR Press when you are finished using a VCR and you
want to switch to the TV input. Your VCR power
will remain on.
4 ANT (antenna) Press to change the VHF/UHF input to the AUX
input (KV-27FS17, KV-27FV17, KV-32FS17 only).
5 PICTURE MODE Cycles through the available Video Mode settings.
6 SLEEP Turns the TV off automatically in approximately
15, 30, 45, 60, 90, or 120 minutes. Cancel by
pressing until SLEEP OFF appears.
7 JUMP Alternates between the last two channels selected
with the
buttons.
8 Cycles through available Steady Sound settings,
(see page 24).
9 RESET Press to return to factory settings while in an on-
screen menu.
0 VOL (volume) Press when you want to adjust the volume.
qa CODE SET Use to program your remote control to operate
connected video equipment, (see page 37).
qs POWER Press when you want to turn connected
equipment on and off.
qd FUNCTION Press when you want to control connected
equipment with your remote control.
qf Picture in Picture
(PIP)
Operates PIP feature. To use the PIP feature, see
page 18.
qg TV/VIDEO Cycles through available video inputs.
qh DISPLAY Press once to show current time, (if set) and
channel number. Press again to turn DISPLAY off.
0 9


The remote control shown on page 14 (RM-Y181) is for KV-27FS17,
KV-27FV17, and KV-32FS17. Your remote control may not look like the one
illustrated.
(continued)