Sony MZ-R500 User Manual

Page 31

Advertising
background image

31

-GB

Notes on battery

Incorrect battery usage may lead to leakage of
battery fluid or bursting battery. To prevent
such accidents, observe the following
precautions:
Install the + and – poles of the battery

correctly.

Do not try to recharge dry battery.
When the recorder is not to be used for a long

time, be sure to remove the battery.

If a battery leak should develop, carefully and

thoroughly wipe away battery fluid from the
battery compartment before inserting new
ones.

Note on mechanical noise

The recorder gives off mechanical noise while
operating, which is caused by the power-saving
system of the recorder and it is not a problem.

To protect a recorded MD

To record-protect an MD, slide open the tab at
the side of the MD. In this position, the MD
cannot be recorded or edited. To record again,
slide the tab back so the tab is visible.

Note on digital recording

This recorder uses the Serial Copy
Management System, which allows only first-
generation digital copies to be made from
premastered software. You can only make
copies from a home-recorded MD by using the
analog connections.

If you have any questions or problems
concerning your recorder, please consult your
nearest Sony dealer. (If a trouble occurred when
the disc was in the recorder, we recommend that
the disc be left in the recorder when you consult
your Sony dealer so that the cause of trouble
may be better understood.)

Back of the MD

Recorded material
is protected.

Tab

Recorded material
is not protected.

Premastered software such
as CDs or MDs.

Digital recording

Home-
recorded
MD

No
digital
recording

Recordable
MD

Microphone, record player, tuner, etc.
(with analog output jacks).

Home-recorded MD

No
digital
recording

Recordable
MD

Digital recording

Analog recording

Recordable
MD

Advertising