Sony HDR-PJ790V - Manual (Page 19)

1
GB
G
etting star
ted
Charging the battery pack
1
Turn off your camcorder by
closing the LCD screen, and
attach the battery pack (be sure
to store the viewfinder first).
Align the indentation on the camcorder
and projection on the battery pack, then
slide the battery pack upwards.

2
Connect the AC Adaptor () and
the power cord (mains lead) ()
to your camcorder and the wall
outlet (wall socket).
The CHG (charge) lamp turns on.
The CHG (charge) lamp turns off when the
battery pack is fully charged. Disconnect
the AC Adaptor from the DC IN jack of
your camcorder.


Notes
You cannot attach any “InfoLITHIUM” battery pack other than the V series to your camcorder.
When attaching a video light (sold separately), it is recommended that you use an NP-FV70 or NP-FV100
battery pack.
You cannot use the NP-FV30 “InfoLITHIUM” battery pack with your camcorder.
In the default setting, the power turns off automatically if you leave your camcorder without any
operation for about 2 minutes, to save battery power ([Power Save], p. 54).




Battery pack
CHG (charge) lamp
DC IN jack
Align the  mark
on the DC plug
with that on the
DC IN jack
DC plug


To the wall outlet (wall socket)