Sony MDS-PC3 - Manual (Page 7)

7 GB
Preparation
1: Installing M-crew
Use this procedure to install the M-crew software onto your computer’s
hard disk. Be sure to start up Windows in advance.
Notes
• Be sure to install this software before connecting the system stereo
component to your computer. If not, this software may not function
properly.
• Be sure to log on through the administrator’s account to install this software
(for Windows2000/Windows XP).
1
Load the supplied M-crew CD-ROM into the CD-ROM drive of
your computer.
The window will open with the (InstallDlg.exe) icon displayed.
Note
If the window does not open, use Windows Explorer to open the window
by double-clicking the M-crew CD-ROM icon.
2
Double-click the (InstallDlg.exe) icon.
The setup window appears.
• If you are using the PCLK-MN10/MN10A and you have already
installed PCLK USB driver onto your computer, go to step 4.
• If you are installing M-crew onto the computer with the CMT-C7NT
connected, proceed the procedure from step 3 even if you are using the
PCLK-MN10/MN10A. Be sure not to skip step 3.
3
Click “1. Setting up PCLK-USB Driver” in the setup window.
The installation of the driver starts. When the dialog box indicating
the completion of the installation appears, click “Finish.”
4
Click “2. Setting up M-crew” in the setup window.
The setup program starts up.
(continued)