Sony HT-CT770 - Manual (Page 27)

27 US
Miscellaneou
s
Specifications
Amplifier section
U.S. models:
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
(FTC)
Front L + Front R:
With 4 ohms loads, both channels driven, from 200 - 20,000 Hz;
rated 35 Watts per channel minimum RMS power, with no more than
1% total harmonic distortion from 250 milliwatts to rated output.
POWER OUTPUT (reference)
SA-CT370:
Front L/Front R: 100 Watts (per channel at 4 ohms, 1 kHz)
SA-CT770:
Front L/Front R: 105 Watts (per channel at 4 ohms, 1 kHz)
Canadian models:
POWER OUTPUT (rated)
Front L + Front R: 50 W + 50 W
(at 4 ohms, 1 kHz, 1% THD)
POWER OUTPUT (reference)
SA-CT370:
Front L/Front R: 100 Watts (per channel at 4 ohms, 1 kHz)
SA-CT770:
Front L/Front R: 105 Watts (per channel at 4 ohms, 1 kHz)
Inputs
HDMI IN 1/2/3*
ANALOG IN
DIGITAL IN (OPT (TV))
* These 3 jacks are identical. Using any of them makes no difference.
Output
HDMI OUT (TV (ARC))
BLUETOOTH section
Communication system
BLUETOOTH Specification version 3.0
Output
BLUETOOTH Specification Power Class 2
Maximum communication range
Line of sight approx. 10 m (33 ft) 1)
Maximum number of devices to be registered
9 devices
Frequency band
2.4 GHz band (2.4000 GHz - 2.4835 GHz)
Modulation method
FHSS (Freq Hopping Spread Spectrum)
Compatible BLUETOOTH profiles 2)
A2DP (Advanced Audio Distribution Profile)
AVRCP 1.3 (Audio Video Remote Control Profile)
Supported Codecs 3)
SBC 4) , AAC 5)
Transmission range (A2DP)
20 Hz - 20,000 Hz (Sampling frequency 44.1 kHz)
1) The actual range will vary depending on factors such as obstacles
between devices, magnetic fields around a microwave oven, static
electricity, cordless phone, reception sensitivity, operating system,
software application, etc.
2) BLUETOOTH standard profiles indicate the purpose of BLUETOOTH
communication between devices.
3) Codec: Audio signal compression and conversion format
4) Subband Codec
5) Advanced Audio Coding
Front L/Front R speaker section
Speaker system
SA-CT370: Full-range speaker system, Acoustic suspension
SA-CT770: 2-way speaker system, Acoustic suspension
Speaker
SA-CT370: 60 mm (2 3/8 in) cone type
SA-CT770: 60 mm (2 3/8 in) cone type woofer
20 mm (13/16 in) balance drive tweeter
Rated impedance
4 ohms
Bar Speaker (SA-CT370, SA-CT770)
continued