Protect, Cyber-shot user guide – Sony DSC-W690 User Manual
Page 104
Search
Precautions / About this camera
Top page > Using MENU items (Viewing) > MENU items (Viewing) > Protect
Protect
Protects recorded images against accidental erasure.
The
mark is displayed for registered images.
1. Press the
(Playback) button to switch to playback mode.
2. MENU
(Protect)
desired mode
on the control button
(This Image)
Protects the currently displayed image in single-image mode.
(Multiple Images)
You can select and protect multiple images. Do as the following after step
2.
Select an image then press
.
Repeat the above steps until there are no more images to be protected.
Select an image with a
mark to release the
mark.
MENU
[OK]
Note
When the internal memory is used to record images, View Mode is set to Folder View and still
images and movies are displayed in the same folder.
To cancel the protection
Select the image for which you want to cancel protection, and unlock it by pressing
on the control
button as the same procedure to protect it.
The
indicator disappears, and the protection is released.
Copyright 2012 Sony Corporation
Search