Sony KDL-26M3000 - Manual (Page 14)

14
Item Description
3 HDMI IN 1/2
R-AUDIO-L HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-digital
audio/video interface between this TV and any HDMI-equipped audio/video equipment, such
as DVD player, a set-top box, A/V receiver and Blu-ray disc player as well as PC. HDMI
supports enhanced or high definition video plus digital audio.
• If the equipment has a DVI and not a HDMI connector, use a HDMI to DVI cable or adapter
to connect the DVI output to either HDMI IN 1 or HDMI IN 2 input, and connect the audio
jacks to the AUDIO (L/R) jacks below the HDMI IN 2. (DVI connector is for video signals
only, the Audio jacks provide support for the audio.)
• For better PC view, use the PC IN (RGB IN) input.
• HDMI connection is necessary to view 480i, 480p, 720p, and 1080i formats. Note that this
TV displays all video input signals in a resolution of 1,366 dots × 768 lines.
4 VIDEO IN 1
S VIDEO Connects to the S VIDEO output jack of your VCR or other video equipment that has
S VIDEO. S VIDEO provides better picture quality than composite video (5). S VIDEO
does not provide sound, you need to connect the audio cables.
5 VIDEO IN 1/3
VIDEO/
L(MONO)-
AUDIO-R Connect to the composite video and audio output jacks on your A/V equipment such as a VCR
or other video equipment. A third composite video and audio (VIDEO IN 2) input is located
on the left side panel of the TV.
VIDEO
AUDIO
(MONO)
L
R
VIDEO IN
S VIDEO 1 3
R-AUDIO-L
RGB
AUDIO
SERVICE
ONLY
PC IN
Y
P B
P R
L
R
COMPONENT IN
(1080i/720p/480p/480i)
2 1
AUDIO
DIGITAL
AUDIO OUT
(COAXIAL)
AUDIO OUT
(FIX)
3
4
8
0
7
9
5
6
VHF/UHF/
CABLE
qa
IN
1
2
Rear
HDMI-to-DVI cable HDMI-to-DVI adapter Audio cable