Sony PEG-UX50 - Manual (Page 33)

33
Sony Personal Entertainment Organizer PEG-UX50/UX40 US 4-676-076-11 (1)
Tr
ou
ble
s
ho
ot
ing
B The network settings may not be correct.
Ask the System Administrator of your wireless LAN network for the
settings.
B Your CLIÉ handheld may be accessing the target wireless LAN access
point at the channel which is also used by more than the target one.
Change to another wireless LAN access point channel.
b For details on changing channels, refer to the manual of the wireless LAN
access point.
B The wireless LAN access point may be busy.
Wait for a short period of time and then try again.
B Turn off the wireless LAN access point once and turn it on, and then try
connecting to the wireless LAN access point again.
B You may be using your CLIÉ handheld near devices that use the 2.4GHz
frequency band, such as a microwave oven or a Bluetooth
®
compatible
device.
Use your CLIÉ handheld away from such devices, or turn off the devices.
B If you need a MAC address, check [MAC Addr:] in the Link Status
screen by following the steps below.
1 Select [Network] in the Preferences screen.
2 Tap [V Service:] to select [Wireless LAN].
3 Tap [Details...].
The Wireless LAN Setup screen is displayed.
4 Tap [Status...].
The Link Status screen is displayed.
The message “Incorrect setting” or “Certification is
invalid” appears
B Check the settings from [Network] in the Preferences screen.
b For details, refer to “Customizing your CLIÉ™ handheld (Preferences):
Changing the Network preferences” in the supplied “Handbook”.
I cannot connect to the Internet via a wireless LAN (for
PEG-UX50 only)