Sony ERS-7M3 - Manual (Page 107)

Se
lec
tin
g/
se
tti
n
g
cus
tom d
a
ta
107
4
Touch the middle (orange) back sensor.
The current setting is group 1 (group 2, group 3). (There is no
setting.)
To change group 1, touch blue. To change group 2, touch
orange. To change group 3, touch red.
5
To set or change group 1, touch the front (blue) back sensor. To set or
change group 2, touch the middle (orange) back sensor. To set or change
group 3, touch the rear (red) back sensor.
The setting has been changed to group 1 (group 2, group 3).
(There is no custom data in group 1 (group 2, group 3).)
The custom data setting/changing procedure is completed.
To change the custom data allocated to group 1/group 2/group 3
You can use AIBO Custom Manager 3 to change the custom data allocated to group 1, group
2, or group 3.
For details, see the documentation for AIBO Custom Manager 3 available at http://
www.aibo.com.
Within 10 seconds