Sony ZS-SN10 - Manual (Page 19)

The CD Player
19
Creating your own
program
(Program play)
You can arrange the playing order of up to
20 tracks on a CD.
Jog dial
1
Press x when the player is not in CD
mode.
2
Press MODE repeatedly in stop mode
until “PGM” appears in the display.
3
Turn the jog dial toward v or V then
press ENTER/MEMORY for the tracks
you want to program in the order you
want.
Audio CD
ATRAC CD/
MP3 CD*
*You can also select another group pressing
+ or –.
Playing order
Playing order
Programed file
x u MODE
ENTER/
MEMORY
4
Press u to start Program play.
On the remote
In step 3 above, press the number buttons for the
tracks you want to program in the order you want.
On an ATRAC CD/MP3 CD, you can also select
another group pressing
+ or –.
To cancel Program play
Stop playing first. Then press MODE
repeatedly until “PGM” disappears from the
display.
To check the order of tracks
before play
Press ENTER/MEMORY while programing.
Every time you press the button, the track
number appears in the programed order.
To change the current program
Press x once while programing. The current
program will be erased. Then create a new
program following the programing
procedure.
Tip
You can play the same program again, since the
program is saved until you open the CD lid.
Programed track