AEG COMPETENCE U3100-4 User Manual

Page 10

Advertising
background image

10

B) TO SET THE TIMER TO SWITCH OFF

ONLY

i)

Ensure the electricity supply is switched ON and
that the correct time of day is displayed, e.g.
10.00am as Fig. 9.

ii) Place food in the oven.
iii) To set the length of cooking time, press the

Selector Control button until the 'Cook Time'
( ) indicator neon is illuminated. Press the
increase control ( + ) until the required length of
cooking time is displayed, e.g. 2 hrs 15 mins as
Fig. 10. Depress the decrease control ( - ) if
necessary.

iv) Release the buttons. The 'Cook Time' indicator

neon ( ) will illuminate and the time of day
will be displayed after 5 seconds.

v) Set the oven temperature. The oven indicator

neon should be ON.

vi) To check the 'End Time' during the cooking

period, simply press the Selector Control button
once and the remaining time will be displayed, as
Fig. 11.

4. TO CANCEL AN AUTOMATIC

PROGRAMME

i)

To cancel an automatic programme press the
Selector Control button until the 'Cook Time'
indicator neon ( ) flashes. Press the decrease
control ( - ) until the display reads 0.00 as Fig.
12.

ii) Release the buttons. The 'Cook Time' indicator

neon ( ) will flash and after 5 seconds return
to the time of day.

iii) Turn off the oven controls.

5. TO RETURN THE APPLIANCE TO

MANUAL

At the end of a timed cooking period, the
indicator neon will flash and an alarm will sound
for up to 2 minutes.

i) To stop the sound press any of the three buttons,

as Fig. 13.

ii) The display will return to the time of day.
iii) Turn off the oven controls.

Fig.9.

Fig.11.

Fig.10.

Fig.12.

Fig.13.

Advertising