Sony WEGA KV-32FS120 - Manual (Page 15)

7
C
onnections
Connecting Additional Equipment
Connecting a TV and VCR
1
Connect the coaxial cable from your TV antenna or cable service to the IN jack on your
VCR.
2
Connect a coaxial cable (not supplied) from the OUT jack on your VCR to the VHF/UHF
jack on the TV.
Optional connection
❏ If your VCR is equipped with video outputs, you can get better picture quality by
connecting audio/video cables (not supplied) from AUDIO/VIDEO OUT on your VCR to
AUDIO/VIDEO IN on your TV.
❏ For better picture quality, use S VIDEO (located on the rear panel), instead of the yellow
video cable. S VIDEO does not provide sound, so you still must connect the audio cables.
✍
You can use the button to switch between the VHF/UHF and VIDEO inputs.
✍
To watch video programs from your VCR, tune your TV to Channel 3 or 4 (as set on the rear of your
VCR).
VIDEO
LINE
IN
LINE
OUT
AUDIO L AUDIO R
1 3 4
AUDIO OUT
(VAR/FIX)
VIDEO
L
(MONO)
R
L
R
(MONO)
S VIDEO
Y
P B
P R
L
R
Optional connection
Audio R (red)
Video (yellow)
Audio L (white)
Rear of TV
VCR
From
cable/antenna
1
2