Sony WEGA KV-32FS120 - Manual (Page 16)

8
Connections
Connecting a TV and Cable Box
Some cable TV systems use scrambled or encoded signals that require a cable box to view all
channels. If you subscribe to such type of service, use this connection.
1 Connect the coaxial cable from your cable service to the IN jack on your cable box.
2
Connect a coaxial cable (not supplied) from the OUT jack on your cable box to the
VHF/UHF jack on your TV.
✍
To view channels from your cable box, tune your TV to channel 3 or 4 (as set on the rear panel of your
cable box) and use the cable box's remote control to change channels.
✍
If you will be controlling all channel selection through your cable box, you should consider using the
Channel Fix feature by setting your TV to channel 3 or 4 (see page 25).
VIDEO
LINE
OUT
AUDIO L AUDIO R
1 3 4
VIDEO
L
(MONO)
R
S VIDEO
Y
P B
P R
L
R
1
2
Rear of TV
Cable box
From cable/
antenna