Sony WEGA KV-32FS120 - Manual (Page 23)

15
C
onnections
Connecting an Audio System
1
Using audio/video cables (not supplied), connect AUDIO OUT on your TV to one of the
unused line inputs (e.g. TV, AUX, TAPE2) on your stereo.
2
Set the Speaker option to Off. For more instructions, see “Using the Audio Menu” on
page 23.
3
After you connect the audio system, you can control the volume level from your TV or
audio system.
❏ To control the volume from the TV, use the front panel controls or the VOL +/–
buttons on the remote.
❏ To control the volume through the connected audio system, open the Audio Out
option on the Audio Menu and select Fixed. For more instructions, see “Using the
Audio Menu” on page 23.
Connecting a Camcorder (for playback)
To connect your camcorder, you can use the Audio/Video inputs on either the front or rear
panel of the TV. Using the audio/video cables (not supplied), connect AUDIO/VIDEO OUT
on your camcorder to AUDIO/VIDEO IN on your TV.
❏ For better picture quality, use S VIDEO (located on the rear panel), instead of the yellow
video cable. S VIDEO does not provide sound, so you still must connect the audio cables.
✍
If you are connecting a Home Theater, please refer to your Home Theater manual for additional
connections.
1 3 4
AUDIO OUT
(VAR/FIX)
VIDEO
L
(MONO)
R
L
R
(MONO)
S VIDEO
Y
P B
P R
L
R
Rear of TV
AUDIO-L (white)
AUDIO-R (red)
Line
input
A/V output
Audio R (red)
Audio L (white)
Video (yellow)
Front Panel