Sony WEGA KV-32FS120 - Manual (Page 41)

33
M
e
nus
Using the Timer Menu
Current Time Set your TV to the current day and time. Press to open the Current
Time menu:
1
Use the V or v buttons to enter the correct day and time, then press
.
2 Press to exit the menu.
Timer 1 and
Timer 2
Scheduled
viewing Use the timers to program your TV to turn on and off by day, time,
duration, and channel. The timer duration is a maximum of six hours.
When the channel is fixed, it is not necessary to set the channel.
1
Use the V or v buttons to highlight Timer 1 or Timer 2, then press
.
2 Use the V or v buttons to enter the desired day, start time, duration,
and channel, then press . The timer status should be On when the
Timer has been set, and the timer light on the front panel of the TV
should be on.
3 Press to exit the menu.
✍
When you perform Auto Program, Timer 1 and Timer 2 settings will be cleared. Also, in the event of
any loss of power, Current Time, Timer 1, and Timer 2 settings will be cleared.
T i m e r 1 : S e t
C u r r e n t T i m e
T i m e r 2 : S e t
Timer
Move Select End
To access the Timer menu, use the following steps:
To Display To Highlight To Select
Press v to highlight an option, then press .
✍
You must set the Current Time before you can use Timer 1 or Timer 2.
✍
Select Off to turn off the Timer. Your previous settings will be saved.