Step 1 preparing the power supply, Charging time, Recording time – Sony CCD-TRV308 User Manual

Page 13

Advertising

Getting started

Step 1 Preparing the power supply

Note
Prevent metallic objects from coming into contact with the metal parts of the DC plug of
the AC power adaptor. This may cause a short-circuit, damaging the AC power
adaptor.

Remaining battery time indicator
The remaining battery time you record with the viewfinder is displayed.
The remaining battery time indicator in the display window roughly indicates the
recording time with the viewfinder.

Until your camcorder calculates the actual remaining battery time
“– – – – min” appears in the display window.

While charging the battery pack, no indicator appears or the indicator flashes in
the display window in the following cases:
– The AC power adaptor is disconnected.
– The battery pack is not installed properly.
– Something is wrong with the battery pack.

We recommend charging the battery pack in an ambient temperature of between
10°C to 30°C (50°F to 86°F).

If the power goes off although the battery remaining indicator indicates that the
battery pack has enough power to operate
Charge the battery pack fully again so that the indication on the battery remaining
indicator is correct.

Charging time

Battery pack

Full charge (normal charge)

NP-FM30 (supplied)

145 (85)

NP-FM50

150 (90)

NP-FM70

240 (180)

NP-QM71

260 (200)

NP-FM90

330 (270)

NP-FM91/QM91

360 (300)

Approximate number of minutes to charge an empty battery pack at 25°C (77°F)

Recording time

CCD-TRV107/TRV108/TRV308/TRV408

Recording with

Battery pack

the viewfinder

the LCD screen

Continuous*

Typical**