Sony KDL-52XBR9 - Manual (Page 24)

24
Programming the Remote Control
The remote control can be programmed to operate other equipment and is pre-programmed to
operate the following Sony equipment.
Programming Other Equipment
~
• Any of the FUNCTION buttons can be programmed to operate other equipment regardless of the labeling.
For example, DVD can be programmed to operate a Blu-ray Disc player.
Confirm the Programming
If you can turn your equipment on and off using the green POWER button, the programming is
complete. If not, try the next code listed.
~
• In some cases, you may not be able to program your remote control. If this is the case, use your equipment’s
own remote control.
Follow the steps below to program your TV remote control.
1
Find the code that corresponds to your equipment from page 25. If more
than one code is provided, try programming the first code listed.
2 Press and hold DVD, AMP or STB simultaneously with the INPUT button
and release. When in the programming mode, the FUNCTION button blinks
for approximately 30 seconds until a code is entered.
3 Enter the five digit code using 0-9 while the FUNCTION button is lit. If the
code is not entered within 30 seconds, you must repeat step 2.
4
Press or ENT to confirm the code. If successfully programmed, the
FUNCTION button blinks twice; if not, it blinks five times.
Function Button Sony Equipment Code Number
DVD DVD Player 31033
AMP Receiver 52172
STB Digital Satellite 01639
DISPLAY
VOL CH
DVD AMP STB TV
PREV REPLAY ADVANCE NEXT
THEATER SCENE CC WIDE
WIDGETS
LIGHT POWER TV POWER
SYNC MENU PAUSE
PLAY
FUNCTION
STOP
BRAVIA INTERNET
VIDEO
3
2
4
2