Sony HDR-SR10 - Manual (Page 30)

30
1
Turn the POWER switch C in the
direction of the arrow until the
(Movie) lamp lights up.
2
Press START/STOP F (or B).
To stop recording, press START/STOP
F (or B) again.
1
Turn the POWER switch C in the
direction of the arrow until the
(Still) lamp lights up.
2
Press PHOTO E lightly to adjust
the focus A (a beep sounds),
then press it fully B (a shutter
click sounds).
appears beside or . When
disappears, the image has been
recorded.
z Tips
• For the recordable time and the number of
recordable images, see pages 11, 24 and 71.
• You can record still images during movie
recording by pressing PHOTO E ([Dual Rec],
p. 32).
• A frame is shown on the detected face, and the
detected face image is optimized automatically
([FACE DETECTION], p. 69).
• When a face is detected during movie recording,
flashes and the detected face is stored in the
index. You can search for a desired scene by a
face image when playing back ([Face Index],
p. 37).
• You can capture still images from recorded
movies (p. 50).
• You can switch the shooting mode by touching
(HOME) A (or D) t (CAMERA)
t [MOVIE] or [PHOTO].
Recording movies
[STBY] b [REC]
Recording still images
Flashing b Lights up