Sony DAV-FX10 - Manual (Page 67)

O
th
e
r O
p
era
tions
67 US
Selecting the connected
component
You can use a VCR or other components
connected to the VIDEO 1 or VIDEO 2 jacks on
the rear panel. Refer to the operation manual
supplied with the components for further
information on the operation.
Press FUNCTION repeatedly until “VIDEO
1” or “VIDEO 2” appears in the front panel
display.
Each time you press FUNCTION, the mode of
the system changes in the following sequence.
DVD t TUNER FM t TUNER AM t
VIDEO 1 t VIDEO 2 t DVD t ...
You can enjoy multiplex broadcast sound when
the system receive the AC-3 multiplex broadcast
signal.
• To receive the AC-3 signal, you need to connect a
digital satellite tuner to the system with an optical
cable or coaxial cable (page 25) and set the digital
output mode of the digital satellite tuner to AC-3.
1
Press AMP MENU.
2
Press x/X repeatedly until “DUAL
MONO” appears in the front panel
display, then press ENTER or c .
3
Press x/X to select the sound you
want.
• MAIN: main sound is output from the left
and right speakers.
• SUB: sub sound is output from the left and
right speakers.
• MAIN+SUB: main sound and Sub sound
are output from the left and right speakers.
• MAIN/SUB: main sound is output from
the left speaker and Sub sound is output
from the right speaker.
4
Press ENTER or AMP MENU.
The AMP menu turns off.
Enjoying the Sound of
Other Components
FUNCTION
Enjoying Multiplex
Broadcast Sound
(DUAL MONO)
Note
AMP MENU
X/x/c
ENTER
With cover opened.