Sony DCR-DVD92 - Manual (Page 37)

37
DCR-DVD92/DVD103/DVD203/DVD403/DVD602/DVD653/DVD703/DVD803
2-587-622-12 (1)
 Touch the portion that you want to
display in the center of the LCD screen.
 Adjust the magnification with W (Wide
angle)/T (Telephoto).
To cancel, touch [END].
• You cannot change the zoom speed with the
zoom buttons  alongside of the LCD screen.
Recording/playback
To check the remaining battery ......

Set the POWER switch up to OFF (CHG),
and then press DISP/BATT INFO
 . If
you press this button once, BATTERY
INFO appears on the screen for about 7
seconds. If you press and hold the button
for a while, this information is displayed
for about 20 seconds.
Remaining
battery
(approx.)
Recording
capacity
(approx.)
To turn off the operation confirmation
beep .....................................

See [BEEP] (p.68) to set the operation
beep.
To initialize the settings ..............

Press RESET  to initialize all the
settings, including settings for date and
time. (Setup items customized on Personal
Menu are not initialized.)
Other part names and functions
 Built-in 4ch microphone (DCR-
DVD403/DVD803)
When an external microphone (optional)
is connected, it takes precedence over the
internal microphone (p.81).
 Built-in stereo microphone (Except for
DCR-DVD403/DVD803)
When an external microphone (optional)
is connected, it takes precedence over the
internal microphone (p.81).
 Remote sensor (Except for DCR-
DVD92/DVD602)
Point the Remote Commander (p.41)
towards the remote sensor to operate
your camcorder.
 Recording lamp
The recording lamp lights up in red
during recording (p.68).
 Speaker
Sounds come out from the speaker.
• For how to adjust the volume, see page 33.
Recording/Playback