ADTRAN AHDSL2 User Manual
Page 24
B-8
61221002L2-5B
HDSL PROVISIONING MENU
From the Provisioning Menu, enter “6” to display the HDSL Provisioning Menu as shown below.
HDSL Provisioning Menu
1. DLT-HDSL
2. ED-HDSL
←
←
←
←
←
Edit HDSL provisioning parameters for the H2TU-C
3. ENT-HDSL
4. RTRV-HDSL
5. DLT-GOS-HDSL
6. ED-GOS-HDSL
←
←
←
←
←
Edit the HDSL Grade of Service tables in the shelf
7. ENT-GOS-HDSL
8. RTRV-GOS-HDSL
B. Provisioning Menu
M. Main Menu
ED-HDSL Commands
Input Format
HDSL configuration parameters may be changed by selecting “2” from the HDSL Provisioning Menu or by
entering the ED-HDSL commands directly as shown below.
<ED-HDSL
NOTE
Items in braces { } are the available selections for the specified parameter.
<ED-HDSL
FT1MODE[]= {NO | YES};
or
<ED-HDSL::RT-1-21:::: FT1MODE ={NO | YES};
<ED-HDSL
LP[]= {SINK | SOURCE};
or
<ED-HDSL::RT-1-21:::: LP ={SINK | SOURCE};
<ED-HDSL
LPBKACTC[]={0000000000000000 | 0000000000000001 | 0000000000000010 | 0000000000000011 };
or
<ED-HDSL::RT-1-21:::: LPBKACTC ={0000000000000000 | 0000000000000001 | 0000000000000010 |
0000000000000011 };