Sony DCR-PC115 - Manual (Page 20)

20
Your camcorder automatically focuses for you.
(1) Remove the lens cap by pressing both knobs on its sides and pull the lens cap
string to fix it.
(2) Install the power source and insert a cassette. See “Step 1” to “Step 3” for more
information (p. 12 to 19).
(3) Pull down the Holding Grip.
Hold your camcorder firmly as illustrated.
(4) Set the POWER switch to CAMERA while pressing the small green button.
Your camcorder is set to the standby mode.
(5) Press OPEN to open the LCD panel. The viewfinder automatically turns off.
(6) Press START/STOP. Your camcorder starts recording. The REC indicator
appears. The camera recording lamp located on the front of your camcorder
lights up. To stop recording, press START/STOP again.
Notes
•Fasten the grip strap firmly.
•Do not touch the built-in microphone during recording.
Note on Recording mode
Your camcorder records and plays back in the SP (standard play) mode and in the LP
(long play) mode. Select SP or LP in the menu settings (p. 96). In the LP mode, you can
record 1.5 times as long as in the SP mode.
When you record a tape in the LP mode on your camcorder, we recommend playing the
tape on your camcorder.
— Recording – Basics —
Recording a picture
6
4
2
5
1
40min REC 0:00:01
3
LOCK
POWER
V
C
R
M
EM
ORY
C
A
M
ER
A
OFF (CHG)
LOCK
POWER
V
C
R
M
EM
ORY
C
A
M
ER
A
OFF (CHG)
LOCK
Microphone
Camera recording
lamp