Preparing the clié remote commander for your use, Assigning devices to the clié remote commander – Sony PEG-NR70V User Manual
Page 168
Advertising
168
Preparing the CLIÉ Remote Commander
for your use
Assigning devices to the CLIÉ Remote Commander
Note
To check whether the manufacturer of your remote-controlled device is
supported by the CLIÉ Remote Commander application, refer to the “Appendix”
on page 210.
1
On the Application Launcher screen, rotate the
Jog Dial
™
navigator to select CLIÉ RMC and press the
Jog Dial navigator.
Or, tap the CLIÉ RMC icon on the Application Launcher screen.
The CLIÉ Remote Commander application starts and a list of the
pre-assigned device is displayed.
2
Tap New.
The New Entry screen is displayed.
Advertising
This manual is related to the following products: