Sony PEG-NR70V - Manual (Page 174)

174
Using the CLIÉ handheld as a remote control
Quick-start button
Operating devices directly with the Jog Dial navigator or the
application button
Follow the steps below to perform the assigned operation from the Jog
Dial navigator or the application buttons.
1
Start CLIÉ Remote Commander.
2
Use the Jog Dial navigator or the application buttons to
remote-control the device.
Viewing the device name assigned to each quick-start button
Tap a quick-start button and hold for over two seconds. The name of
the device assigned to each quick-start button is displayed.