Sony KDL-37NL140 - Manual (Page 6)

6
3
Install the TV unit to the Table-Top Stand by
aligning the end of the concave section of the
TV unit to the metal neck of the Table-Top
Stand.
~
• When you carry the TV unit, place your hands as
illustrated on page 5 and hold it securely. Do not
put stress on the LCD panel and the frame around
the screen.
• Be careful to not pinch your fingers or the AC
power cord when you install the TV unit to the
Table-Top Stand.
4 Stabilize the TV unit and the Table-Top Stand
with the supplied 4 screws.
~
• If you use an electric screwdriver, set the torque for
tightening at approximately 1.5 N
·
m {15Kgf
·
cm}.
Sony strongly recommends taking
measures to prevent the TV from toppling
over; as unsecured TVs may topple and
result in property damage, serious bodily
injury or even death.
Prevent the TV from Toppling
s
Secure the TV to a wall and/or stand.
s Do not allow children to play or climb on
furniture and TV sets.
s Avoid placing or hanging items on the TV.
s Never install the TV on:
• slippery, unstable and/or uneven surfaces.
• furniture that can easily be used as steps, such
as a chest of drawers.
s Install the TV where it cannot be pulled,
pushed, or knocked over.
s Route all AC power cords and connecting
cables so that they are not accessible to
children.
Recommended Measures to Secure the TV
1 Secure the stand for the TV.
If you use a Sony TV Stand (not supplied), make
sure the TV stand can adequately support the
weight of the TV. Use two angle braces (not
supplied) to secure the stand.
For each angle brace use the appropriate hardware
to:
• attach one side of the angle brace to the wall stud.
• attach the other side to the TV stand.
Securing the TV
Stand
Angle brace