Sony CCD-TRV58 - Manual (Page 12)

12
Step 1 Preparing the power supply
Charging the battery pack
Use the battery pack after charging it for your camcorder.
Your camcorder operates only with the “InfoLITHIUM” battery pack (L series).
See page 65 for more information about “InfoLITHIUM” battery pack.
(1) Open the DC IN jack cover and connect the AC power adaptor supplied with
your camcorder to the DC IN jack with the plug’s v mark facing up.
(2) Connect the power cord to the AC power adaptor.
(3) Connect the power cord to a wall outlet.
(4) Set the POWER switch to OFF (CHARGE). Charging begins, and the CHG
lamp lights up.
When the CHG lamp goes out, the charging is completed.
PLAYER
POWER
OFF
CAMERA
(CHARGE
)
4
2
1
After charging the battery pack
Disconnect the AC power adaptor from the DC IN jack on your camcorder.
CHG lamp