Sony KDL-40S4100 - Manual (Page 41)

Other Information
41
O
th
e
r Info
rm
a
tio
n
PC Input Signal Reference Chart
After connecting the PC to the TV, set the output signal from the PC according to the chart below.
* The 1080p timing when applied to the HDMI input will be treated as a video timing and not PC timing.
This affects Picture settings, Wide Mode settings, and PIP function. To view PC content set Picture
Mode to Custom, Wide Mode to Full, and Display Area to Full Pixel.
Resolution
Horizontal
frequency (kHz) Vertical
frequency (Hz) Standard
Signals Horizontal
(Pixel)
× Vertical
(Line)
VGA 640 × 480 31.5 60 VGA
640 × 480 37.5 75 VESA
720 × 400 31.5 70 VGA-T
SVGA 800 × 600 37.9 60 VESA Guidelines
800 × 600 46.9 75 VESA
XGA 1024 × 768 48.4 60 VESA Guidelines
1024 × 768 56.5 70 VESA
1024 × 768 60.0 75 VESA
WXGA 1280 × 768 47.4 60 VESA
1280 × 768 47.8 60 VESA
1280 Ч 768 60.3 75
1360 Ч 768 47.7 60 VESA
SXGA 1280 × 1024 64.0 60 VESA
1280 × 1024 80.0 75 VESA
HDTV 1920 × 1080 67.5 60 CEA-861*
This TV’s PC input does not support Sync on Green or Composite Sync.
This TV’s PC VGA input does not support interlaced signals.
Your PC must support one of the above PC input signals to display on the television.
For the best picture quality, it is recommended to use the signals (boldfaced) in the above chart with a
60 Hz vertical frequency. In plug and play, signals with a 60Hz vertical frequency will be detected
automatically. (PC reboot may be necessary.)