Sony LF-PK1 - Manual (Page 37)

Ad
v
a
nc
ed
Ba
se Station Settings
37
This section explains the operations common to
each frame in the [Advanced Setup] page.
1 Click the item to configure.
The information for the clicked item appears
in the frame on the right.
2 Make settings or perform operations for the
selected item.
If you make any settings, be sure to click [Set]
to save the changes.
3 Jump to the [Easy Setup] screen.
4 Exits settings and automatically reboots the
base station.
The remainder of this section explains the
specific settings and operations of each frame in
the [Advanced Setup] page.
To access the base station via the Internet, you
need to set its IP address and make DNS settings.
The [Internet Connection] frame allows you to set
an IP address for your base station, according to
your network environment. You can also check the
base station’s MAC address for the wired LAN.
To determine the address to set, contact your
contracted ISP to the operating instructions of
your modem or router.
Note
If you change the IP address in the [Internet
Connection] frame and then click [Set] while you are
connected using a router, you will no longer be able to
access the [Base Station Settings] screen because the IP
address changes. To open the [Base Station Settings]
screen, click [Base Station Settings] on the [Base
Station Selection] screen of the LocationFree Player.
Basic Operations in
the [Advanced
Setup] Page Setting Up Your
Internet Connection
Internet Connection
1
2
3
4
5
6
8
9
0
7