Initializing the base station, Tton – Sony LF-PK1 User Manual
Page 48
Advertising
Oth
e
rs
48
If you initialize the base station, all settings are
reset to factory default.
1
Turn off the base station.
2
While pressing the BASE STATION RESET
button on the rear of the base station, turn on
the POWER.
Hold down the BASE STATION RESET
button until the NETAV LED on the front of
the base station lights red.
Initializing the Base
Station
Rear of base station
Front of base station
BASE STATION RESET button
NETAV LED
Advertising
This manual is related to the following products: